泰安市泰山區精達動力機械制造廠為大家?guī)黻P(guān)于CRS815高壓共軌綜合型試驗臺?特點的詳細介紹，并圖文并茂的給大家展示了高壓共軌試驗臺的使用，預知詳情請點擊噴油泵試驗臺廠家的官方網站進行查詢吧。

CRS918高壓共軌綜合試驗臺基本特點：

高壓共軌綜合型試驗臺設備自帶標準各種電噴油泵噴油器的測試數據（3900余種），

可測試BOSCH CP1,CP1-H,CPI-K,CP2,CP3,DELPHI,HPO,HP3 BOSCH、SIEMENS、DELPHI、卡特320D泵 機油促動泵 DENSO等高壓共軌噴油泵及EUI EUP等系列電控單體泵 泵噴嘴和HEUI 中壓共軌油泵 噴油器， 如，C7C9 C-9 C13等 ，并帶有凸輪箱體 噴油器夾具等附件。

共軌系統可測試BOSCH,(博世),DELPHI,(德爾福),SIEMENS(西門子),DENSO(電裝)及壓電晶體高壓共軌噴油器。

功能：

01、測量高壓共軌噴油器的全負荷油量

02、測量高壓共軌噴油器的啟動油量

03、測量高壓共軌噴油器的回油量

04、測試軌道壓力

05、測試共軌噴油器的噴油壓力

06、測試共軌噴油器的噴霧錐角

07、測試共軌噴油器的噴霧均勻性

08、測試共軌油泵及噴油器的密封性

09、測試高壓共軌油泵的供油壓力

10、測試共軌油泵的回油量

11、測試油泵轉速

12、燃油溫度預置

13、檢測共軌泵的內壓

14、檢測共軌泵的各測試點油量

15、測試EUI、EUP電控單體泵、泵噴嘴的性能

16、測試壓力范圍：1-250MPa

Basic characteristics of crs918 high voltage common rail comprehensive test bench:

The high-pressure common rail Integrated Test-bed equipment is equipped with test data of various standard electric fuel injection pump injectors (more than 3900 kinds),

It can test Bosch CP1, cp1-h, cpi-k, CP2, CP3, Delphi, HPO, HP3 Bosch, Siemens, Delphi, Carter 320d pump oil actuating pump Denso and other high-pressure common rail fuel injection pumps, EUI EUP and other series of electronic control unit pump nozzle and HEUI medium pressure common rail fuel pump injector, such as c7c9 C-9 C13, with cam box injector fixture and other accessories.

The common rail system can test Bosch, (Bosch), Delphi, (Delphi), Siemens (Siemens), Denso (electronic assembly) and piezoelectric crystal high-pressure common rail injectors.

Function:

01. Measure the full load fuel volume of the high-pressure common rail injector

02. Measure the starting oil volume of high-pressure common rail injector

03. Measure the return oil quantity of high-pressure common rail injector

04. Test track pressure

05. Test the injection pressure of common rail injector

06. Test the spray cone angle of common rail injector

07. Test the spray uniformity of common rail injector

08. Test the sealing of common rail oil pump and injector

09. Test the oil supply pressure of high-pressure common rail oil pump

10. Test the return oil volume of the common rail oil pump

11. Test oil pump speed

12. Fuel temperature preset

13. Detect the internal pressure of common rail pump

14. Check the oil volume at each test point of the common rail pump

15. Test the performance of EUI and EUP electric control unit pumps and pump nozzles

16. Test pressure range: 1-250mpa

英文由百度翻譯，僅供參考。